034 Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 23.8mm MQB/MQB Evo Front

Product Description:

The Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes everything you need to replace the polyurethane bushings included with your 034Motorsport Sway Bar with Teflon-lined bushings.

These maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.

The 034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes 2 Teflon-lined bushings and plugs to replace the Zerk fitting that exists on your 034Motorsport Sway Bar Bracket.

Features:

• Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
• Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH).
• Improves Sway Bar Response Speed
• Extended Service Life
• No Additional Lubricant Needed, and Should Not Be Added
• Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
• Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment
• Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See
• Limited Lifetime Warranty, Covering Manufacture Defects:
  • Material Cracking
  • Separation Of Teflon Liner and Polyurethane Bushing
  • Squeaking Under Normal (Street/Track) Conditions.

Note: During installation, it is essential to remove all existing grease from the sway bar before installing the new Teflon-lined bushings. We recommend using a rag and a degreaser, followed by a standard cleaner, to ensure the surface is completely dry prior to installation.

Compatible with:

• 034-402-1009 Adjustable Solid Front Sway Bar Upgrade, Volkswagen & Audi MQB and MQB EVO