Often Imitated, Never Duplicated.
INSTALLATION GUIDE
Let us preface by boldly stating this is NOT a universal product, but rather handcrafted to fit the Audi 8V RS3, S3, and A3 accurately and specifically. Isn’t that such a refreshing statement? Gone are the days of “universal” parts that yield lackluster results.
WHATS INCLUDED?
- Installation Guide
- 62" 6061 T6 Wing Element
- 6061 T6 Billet Aluminum Airfoil Mounts
- 6061 T6 Billet Aluminum Uprights
- 6061 T6 Billet Aluminum Inner Support Arms
- 5052 Upper and Lower mounting brackets
- AoA Adjustable End Plates
- Stainless Metric Torx Hardware at AoA adjustments
- Black Zinc Stainless Hardware
- Loctite Threadlock
- Pre-installed CNC precision knife cut Foam Pads on both Airfoil and Trunk Mounting Plates
- Weighing in at 17lbs
GOOD TO KNOWS!
- Fits Years 2014-2020 (RS3, S3, A3)
- Inner trunk support arms to transfer load properly
- Wing Element comes with Billet Mounts pre installed
- Height measuring in at 12.5" above trunk
- Trailing edge measuring 5" from rear bumper
- Combat a stiffer suspension set up
- Reduce braking distance
- AoA adjustability 0-12deg in increments of 2deg
- CFD and FEA validated
- CNC precision machined mounts and brackets
- CNC precision press brake bent brackets
- Most innovative and least intrusive mounting system available
- Beautiful and Durable Powder Coat finish
We Are Innovators
aerofabb® is proud to say that we are the first to develop a fully functional Rear Wing Kit for your Audi RS3, S3, or A3 with such a robust and mounting system. Inner trunk support arms and mounting brackets were designed in order to ensure the transfer of force was properly distributed unlike many of your standard wings on the market.
For optimal functionality, the wing height, mounting spread, and distance off of the rear bumper were all taken into account when designing. Expect a nearly stress free install that requires NO access holes through secondary trunk skin in order to fasten like many universal trunk mount wings.
Rear Wing Kit Construction
The aerofabb® Competition Series Rear Wing Kit is constructed from precision CNC machined 6061 T6 Billet Aluminum Uprights and Airfoil Mounts which are finished in a smooth and durable matte black powder coat. Both the Airfoil and trunk mounting plates feature pre-attached precision CNC knife cut foam mounting pads to reduce vibration, eliminate any metal on paint contact, and create a weather proof seal.
The Wing Element is a rigid, lightweight, 6061 T6 Aluminum airfoil with a span of 62" and a chord length of approximately 10", finished in a lightly textured, durable, matte black powder coat.
The endplates are constructed from a U.S made, High-Impact Plastic which comes in a durable, lightly textured, Matte Black Finish.
Countersunk Stainless Steel Metric Torx hardware is used in necessary areas securely mount and fasten all components together. Durable and weatherproof black plastic washers are utilized on the Wing Elements AoA adjustment points to eliminate marring of the powder coated finish.
Adjustability
Depending on your current aero, suspension set-up/rake, or track of choice, aerofabb® gives you AoA adjustability on both the Wing Element and Endplates from 0-12deg in increment of 2deg.
FEA Optimized Mounting System
FEA (Finite Element Analysis) software was used to reduce weight and validate that the mounting components where still able to maintain the load, stress, and stability needed to function properly.
CFD / Real World Optimized Aerodynamics
Using ANSYS Fluent Software for CFD (Computational Fluid Dynamics) and real world testing on track, we were able to optimize our design and validate its functionality. Our FEA validated, 6061 T6 Billet Aluminum Swan Neck Uprights support the wing from above, leaving the low pressure zone smooth and free of any interference.
