APR ECU Upgrade** - 2.5T EA855 EVO for Audi 8V RS3, 8S TTRS

APR

$0.00 - $1,417.43
(No reviews yet) Write a Review
SKU:
ECU-25T-EA855-EVO
Avalability:
Please email us for an appointment
Adding to cart… The item has been added

Overview

APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port, resulting in a clean and headache-free install. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!
 

Fits 2017-2022 Audi RS3, TT RS

Features:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Warranty - APR Plus is available, providing a factory term limit matching limited powertrain warranty
  • Program Switching - Change programs and access features with your cruise control stalk
  • APR Mobile - Change programs and access features with your smart device
  • Anti-Theft - Password protects driving the vehicle
  • Security Lockout - Password protects program switching
  • Fault Code Erase - Resets ECU fault codes and adaption on the fly
  • Stages - Multiple performance levels depending on installed hardware
  • Low Grip - Multiple profiles designed to enhance launching in low and high grip situations
  • Fuel Grades - Multiple octanes from which to choose
  • Ethanol - Ethanol support from E60-E85 for maximum performance
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Linear Throttle - Pedal maps adjusted for a more linear feel
  • Brake Boosting - Left foot braking or brake boosting added
  • Rev Limiter - Increased redline for higher revving
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Speed Limiter - Go as fast as you want with the speed limiter out of the way
  • Motorsport Limiter - With the soft limiter removed, you‚Äôll get full power right up to the hard, ‚Äúbap bap bap‚Äù redline fuel cut
  • Auto Start/Stop Inversion - Auto Start/Stop defaults to the off position
  • Exhaust Crackle - Multiple exhaust crackle profiles including factory, mild, and aggressive all with mode switching and component protection
  • Exhaust Flaps - Enhanced power delivery and drivability through recalibrated exhaust flap actuation
  • Added Safety - Additional safety features and protection modes added
  • Boost Gauge - The factory boost gauge displays accurate boost and reacts more quickly
  • Power and Torque Gauges - The factory power and torque gauges are accurately rescaled
  • Optimized Cold Start - Stage 2 features an optimized cold start that will surely please your neighbors
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
  • Flash Counter - Flash counter does not increase with each flash
  • Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
  • Free Updates - Get free updates for life
  • Guarantee - 30 day money back guarantee

APR World Class Calibration Expertise

engine

Tuning 101:

The 2.5T engine uses a Bosch MED 17 ECU for engine management. Basically, it’s a computer that tells the engine how to operate. Tuning software, like the APR ECU Upgrade, tells the engine how to make more power. It does this by running more boost pressure, optimizing the cam shaft positions, adjusting the air/fuel ratio, advancing ignition timing, and more.

A Better Engine Management System:

The 2.5T’s ECU is incredible. Without the driver knowing otherwise, the ECU makes intelligent adjustments to the engine’s operations to keep it running smoothly. Unlike ECUs found in many other makes and models, when properly tuned, the ECU eliminates the need for custom tuning to maximize output, even when weather conditions change dramatically.

How APR Differs from the Competition:

The ECU is powerful, but extremely difficult to master. Without mastery, the ECU must be simplified, removing what makes it so desirable. The result is an incomplete product that often requires end user adjustment to maximize output in limited scenarios. On the contrary, APR’s Engineers spent the better part of a decade mastering the ECU to unlock its full potential. With complete access to the thousands of maps, tables and variables within, as well as a high-level understanding of how it works, APR’s Engineers were able to take advantage of everything the ECU has to offer. Power is maximized in nearly all scenarios, eliminating the need for end user adjustments. High performance operational modes are enabled and calibrated to deliver smooth daily driving, with a snappy and responsive throttle during moments of spirited driving. Mastery of the boost control system makes for an impressively predictable driving experience as the turbo spools quickly, delivering instant power, while torque-by-gear helps with traction control and protects the engine from being lugged out in tall gears. Lastly advanced high-output protection routines are enabled, allowing the ECU to make constant adjustments to airflow and fuel to cool and protect the engine, all without the driver knowing otherwise.

Extreme Testing

APR’s ECU Upgrade has been full tested for the better part of a year prior to a public release. This includes summer and winter weather testing on multiple continents, high and low altitude testing, extensive track testing at multiple road courses, extensive drag strip testing and extensive road and daily driving testing. APR’s test vehicles are full instrumented with multiple sensors, including pre and post intercooler temperature and pressure sensors, pre and post turbine temperature and backpressure sensors, pre and post catalyst temperature and pressure sensors, and multiple pressure sensors throughout the intake system. APR test vehicles have seen over 700 HP in various configurations, on the stock engine internals, and have set multiple world records, including 10.5 second stage 1 quarter mile passes, and 9 second stage 3 passes.

RS3 RS3 RS3

RS3 RS3 RS3 RS3 RS3 RS3 ttrs

APR ECU Upgrade Stages 

Our ECU Upgrades are available in multiple configurations. Installation of additional performance hardware, such as an intercooler or intake systems, may provide further performance improvements. Each stage includes optimizations to the factory boost gauge making it react more quickly and corrections to the power and torque gauges to match the increased output. Furthermore, we’ve added left foot braking, removed the speed limiter, raised the rev-limiter and added a motorsport limiter, reenabled the crackle on models where it was removed (2019+), adjusted the factory crackle to protect the components on Stage 1 and 1+ and enabled in more scenarios on Stage 2, retuned the exhaust flap actuation for the best performance and sound in multiple modes, optimized high altitude mappings, retuned the throttle for better response, and completely optimized the driving experience for street and track use making for a much more enjoyable driving experience!

APR Stage 1

The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to 459-542 HP and 451-500 FT-LBS of torque. This stage has optional high and low grip modes designed to reduce wheel spin and aid in 60 FT and 0-60 times depending on surface prep. APR Spark Plugs are recommended.

APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI and E60-E85 Ethanol in North America, and 95 RON, 98 RON, 102 AKI, 104 AKI, 108 AKI and E60-E85 Ethanol in the Rest of the World.

APR Stage 1 Plus

The APR Stage 1+ ECU Upgrade is the next step towards tuning your engine. It produces up to 493-569 HP and 454-520 FT-LBS of torque, depending on octane. Use this tune with the APR Turbo Inlet. This stage has optional high and low grip modes designed to reduce wheel spin and aid in 60 FT and 0-60 times depending on surface prep. APR Spark Plugs are recommended.

APR Stage 1+ is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI and E60-E85 Ethanol in North America, and 95 RON, 98 RON, 102 AKI, 104 AKI, 108 AKI and E60-E85 Ethanol in the Rest of the World.

APR Stage 3

The APR Stage 3 ECU Upgrade is the next step towards tuning your engine. It produces up to

  • 576-713 HP with 523-536 FT-LBS of torque (TTE700)
  • 581-740 HP with 511-555 FT-LBS of torque (GTX3582)

Use this tune with the TTE700 turbocharger w/ included WG actuator or GTX3582 turbocharger with turbosmart WG actuator and MAC 3-port solenoid. Use 980cc port injectors. Use a proper 500 LPH+ @ 6 bar LPFP with E85 (SRM Brushless). This stage has optional high and low grip modes designed to reduce wheel spin and aid in 60 FT and 0-60 times depending on surface prep. Additionally this stage is available with optional crackle modes. APR Spark Plugs are recommended.

APR Stage 3 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI and E60-E85 Ethanol in North America, and 95 RON, 98 RON, 102 AKI, 104 AKI, 108 AKI and E60-E85 Ethanol in the Rest of the World.

APR EMCS Programs and Features

APR’s Enhanced Modular Chipping System, (EMCS), brings selectable programs and features to the factory ECU, without the need to purchase external hardware switching devices. EMCS has the ability to completely rewrite the entire operating map data within the ECU, giving each program mode a completely different set of calibration changes. On this platform, this is contrary to the industry norm of capping limits, using multipliers, only swapping portions of a base calibration, or relying on knock activity to lower output. APR’s EMCS features and programs modes are activated via the factory OEM cruise control buttons, and optionally through APR Mobile. The vehicle’s cruise control will function normally while driving.

To learn how to activate the programs and features, choose the vehicle's cruise control type from APR EMCS Owner's Manual.

 

Program SwitchingProgram Switching:
Program switching allows the user to cycle through up to four different engine calibrations and operating modes all without the need for external hardware.

 

 

 

StockStock Mode: By selecting stock mode, the ECU calibration is reset to the factory calibration. 

 

 

 

 

fault code eraseFault Code Erase:
Fault code erase allows the user to erase and reset engine related trouble codes and ECU adaptation data without using a specialty tool.

 

 

 

 

security lockoutSecurity Lockout:
Security lockout prevents unauthorized individuals from using APR's EMCS functionality. When enabled, APR's EMCS features will appear completely invisible until a user specified 2 to 4-digit security code is entered.

 

 

 

PerformanceAPR Performance Modes:
APR's octane-specific calibrations are available for various premium and race fuels around the world. Each performance mode is a completely new calibration, altered specifically for the characteristics of the fuel quality selected.

 

 

 

anti theftAnti-Theft:
When activated, Anti-Theft prevents normal operation of the engine even if the factory key is used. The vehicle will be completely immobilized until a user specified 2 to 4-digit security code is entered.

 

 

 

APR Mobile

APR Mobile is a simple yet powerful tool designed to enhance the APR tuning experience.

APR Mobile installs on smart phones, tablets and other devices and provides a wireless connection to the vehicle’s engine control unit or ECU. Once connected, the device can be used to access APR’s EMCS program switching features, read and clear fault codes and data log the ECU at high data rates not found on other commercially available tools. The app can also be used to access APR’s latest news articles, locate dealers in APR’s network and review previously saved data logging sessions.

To learn more about APR Mobile, please visit our product page.

Program switching guide

APR Direct Port Programming

DirectPort ProgrammingAPR’s DirectPort Programming is now available! Any APR Dealer in the world, connected to the Internet, has direct access to APR’s latest ECU upgrades for loading directly over the vehicle's OBD-II port. This completely eliminates the need to remove and open the ECU for currently available files and can be uninstalled at any time!

 

 

APR ECU Explorer

ECUxAPR’s proprietary ECU Explorer gives APR’s Calibration Engineers unparalleled access to the vehicle’s entire engine management system. Typical commercially available data logging tools, used by most tuners, only allow logging up to 12 engine-operating variables at extremely low data rates. These tools are also limited to a small, specific list of variables. APR’s ECU Explorer is capable of logging every variable found within the ECU with far more variables logged at once, at very high data rates.

 

 

APR ECU Composer

ECUcAPR’s proprietary ECU Composer is used for altering the engine management system. With full access to every table, map and variable within the ECU, APR’s Calibration Engineers are not limited to a handful of maps as is common for most tuning companies.

 

APR ECU Assembly

ECUsAPR’s Electrical Engineers have the ability to alter the code structure of the ECU. Through code levels changes, APR's Engineers are able to add features to the ECU. Other changes allow higher torque limits than those achievable through only modifying calibration data or using piggyback devices as is the case for many tuners. This allows APR's engineers to often not require transmission software to meet or exceed advertised gains. On the highly modified end, this often allows APR to make turbo upgrades operate without the need for external manual controllers.

 APR Calibration Report

STAGEHPTQMAX GAINMAX GAIN
Stock As Reported by VAG  394 HP 354 FT-LBS    
Stock As Measured by APR 420 HP 372 FT-LBS    
APR PLUS    
91 AKI 459 HP 451 FT-LBS +66 HP +88 FT-LBS
APR STAGE 1    
91 AKI / 95 RON 459 HP 451 FT-LBS +66 HP +88 FT-LBS
93 AKI / 98 RON 476 HP 470 FT-LBS +86 HP +108 FT-LBS
102 RON 491 HP 475 FT-LBS +98 HP +112 FT-LBS
100 AKI / 104 RON 516 HP 498 FT-LBS +106 HP +137 FT-LBS
104 AKI / 108 RON 524 HP 506 FT-LBS +113 HP +146 FT-LBS
E85 542 HP 500 FT-LBS +132 HP +134 FT-LBS
APR STAGE 1+    
91 AKI / 95 RON 493 HP 454 FT-LBS +86 HP +96 FT-LBS
93 AKI / 98 RON 513 HP 480 FT-LBS +104 HP +116 FT-LBS
102 RON 528 HP 485 FT-LBS +116 HP +121 FT-LBS
100 AKI / 104 RON 533 HP 510 FT-LBS +125 HP +144 FT-LBS
104 AKI / 108 RON 541 HP 518 FT-LBS +132 HP +152 FT-LBS
E85 569 HP 520 FT-LBS +162 HP +152 FT-LBS
APR STAGE 2    
91 AKI / 95 RON 499 HP 468 FT-LBS +92 HP +113 FT-LBS
93 AKI / 98 RON 519 HP 496 FT-LBS +110 HP +134 FT-LBS
102 RON 529 HP 490 FT-LBS +120 HP +125 FT-LBS
100 AKI / 104 RON 540 HP 512 FT-LBS +131 HP +147 FT-LBS
104 AKI / 108 RON 548 HP 520 FT-LBS +140 HP +156 FT-LBS
E85 574 HP 530 FT-LBS +165 HP +165 FT-LBS
APR STAGE 3 TTE700    
91 AKI / 95 RON 576 HP 512 FT-LBS +162 HP +145 FT-LBS
93 AKI / 98 RON 596 HP 523 FT-LBS +182 HP +158 FT-LBS
100 AKI / 104 RON 682 HP 526 FT-LBS +269 HP +202 FT-LBS
104 AKI / 108 RON 694 HP 531 FT-LBS +280 HP +210 FT-LBS
E85 713 HP 536 FT-LBS +294 HP +221 FT-LBS
APR STAGE 3 GTX3582R    
91 AKI / 95 RON 581 HP 511 FT-LBS +164 HP +145 FT-LBS
93 AKI / 98 RON 601 HP 523 FT-LBS +187 HP +158 FT-LBS
100 AKI / 104 RON 707 HP 544 FT-LBS +295 HP +221 FT-LBS
104 AKI / 108 RON 720 HP 549 FT-LBS +306 HP +230 FT-LBS
E85 740 HP 555 FT-LBS +321 HP +241 FT-LBS

 

Application Guide
Vehicle                     MarketEngine         Transmission
Audi RS3 (Facelifted) (MKIII / Typ 8V)    All   2.5 TFSI EA855    EVO - (DAZA) S Tronic
Audi TT RS (MKIII / Typ 8S)    All   2.5 TFSI EA855 EVO - (DAZA) S Tronic
Audi RS Q3 (MKII / Typ F3)    All

  2.5 TFSI EA855 EVO - (DAZA)         

S Tronic