APR ECU Upgrade** - 2.0T EA888 Gen 2 (Longitudinal) for 2009-2017 Audi A4/A5/A6/Allroad & Q5

APR

$135.00 - $809.93
(No reviews yet) Write a Review
SKU:
ECU-20T-EA888-2-L
Availability:
Please call or email us for an appoinment
Adding to cart… The item has been added

Overview

APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port, resulting in a clean and headache-free install.
 

Fits 2009-2017 Audi A4, A5, A6, allroad, Q5

Features:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Program Switching - Change programs and access features with your cruise control stalk
  • APR Mobile - Change programs and access features with your smart device
  • Valet Mode – Neuters the vehicle, giving the driver minimal output
  • Anti-Theft – Password protects driving the vehicle
  • Security Lockout – Password protects program switching
  • Fault Code Erase – Resets ECU fault codes and adaption on the fly
  • Fuel Grades - Multiple octanes from which to choose
  • Flex Fuel - Full ethanol flex fuel support on compatible flex fuel models
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Brake Boosting - Left foot braking or brake boosting added
  • Speed Limiter - Go as fast as you want with the speed limiter out of the way
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
  • Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
  • Free Updates - Get free updates for life
Important fuel quality information
Important fuel quality information
 
Find your boxcode and revision
Find your boxcode and revision
 
Program switching guide
Program switching guide
 
CARB EO Document
Lists applicable vehicles and scenarios. Please verify your configuration is applicable.
 
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
 

APR ECU Upgrade Stages

APR’s ECU Upgrades are available in multiple octanes levels. Each stage is fully compatible with an upgraded intake, catback exhaust, or other minor bolt on modifications.

APR Stage 1

The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to:

  • 256-282 HP and 301-323 FT-LBS of torque (B8 / B8.5 Models)
  • 270-313 HP and 329-388 FT-LBS of torque (B8.5 w/ Flex)

APR Stage 1 is available for 91 AKI, 93 AKI, and 100 AKI in North America, and 95 RON, 98 RON, and 104 RON in the Rest of the World. Flex Fuel compatible models support any blend of Ethanol or E85 in both markets.

APR Stage 2

The APR Stage 2 ECU Upgrade is the next step towards tuning your engine. It produces up to:

  • 287-304 HP and 341-359 FT-LBS of torque (B8/B8.5 Models)
  • 297-318 HP and 329-405 FT-LBS of torque (B8.5 Flex Models)

APR Stage 2 is available for 91 AKI, 93 AKI, and 100 AKI in North America, and 95 RON, 98 RON, and 104 RON in the Rest of the World. Flex Fuel compatible models support any blend of Ethanol or E85 in both markets.

APR Stage 3 K04

The APR Stage 3 ECU Upgrade is the next step towards tuning your engine. It produces up to:

  • 339-363 HP and 321-387 FT-LBS of torque
  • 329-374 HP and 350-408 FT-LBS of torque

Use this tune with the APR K04-064 turbocharger. APR Spark Plugs are recommended.

APR Stage 3 K04 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 RON, and 108 RON in the Rest of the World. Flex Fuel compatible models support any blend of Ethanol or E85 in both markets.

APR Calibration Report

STAGE (B8 / B8.5)HPTQMAX GAINMAX GAIN
Stock As Reported by VAG  179-220 PS  236-258 FT-LBS    
Stock As Measured by APR 211 HP
230 HP
259 FT-LBS
271 FT-LBS
   
STAGE 1    
91 AKI / 95 RON 256 HP
270 HP  
301 FT-LBS
329 FT-LBS 
+55 HP
+43 HP
+53 FT-LBS
+77 FT-LBS
93 AKI / 98 RON 266 HP
284 HP  
323 FT-LBS
338 FT-LBS 
+66 HP
+57 HP
+74 FT-LBS
+85 FT-LBS
100 AKI / 104 RON 282 HP
303 HP  
360 FT-LBS
360 FT-LBS 
+78 HP
+77 HP
+74 FT-LBS
+107 FT-LBS
E85 / Flex Fuel N/A
313 HP  
N/A
388 FT-LBS 
N/A
+85 HP
N/A
+134 FT-LBS
STAGE 2    
91 AKI / 95 RON 287 HP
297 HP  
341 FT-LBS
329 FT-LBS 
+97 HP
+70 HP
+92 FT-LBS
+77 FT-LBS
93 AKI / 98 RON 291 HP
302 HP  
354 FT-LBS
343 FT-LBS 
+101 HP
+76 HP
+105 FT-LBS
+89 FT-LBS
100 AKI / 104 RON 304 HP
309 HP  
359 FT-LBS
377 FT-LBS 
+111 HP
+83 HP
+108 FT-LBS
+125 FT-LBS
E85 / Flex Fuel N/A
318 HP  
N/A
405 FT-LBS 
N/A
+92 HP
N/A
+153 FT-LBS
STAGE 3    
91 AKI / 95 RON 339 HP
329 HP  
321 FT-LBS
350 FT-LBS 
+149 HP
+113 HP
+121 FT-LBS
+92 FT-LBS
93 AKI / 98 RON 348 HP
344 HP  
342 FT-LBS
369 FT-LBS 
+158 HP
+122 HP
+130 FT-LBS
+108 FT-LBS
100 AKI / 104 RON 363 HP
355 HP  
387 FT-LBS
385 FT-LBS 
+171 HP
+139 HP
+145 FT-LBS
+119 FT-LBS
104 AKI / 108 RON N/A
361 HP  
N/A
405 FT-LBS 
N/A
+142 HP
N/A
+148 FT-LBS
E85 / Flex Fuel N/A
374 HP  
N/A
408 FT-LBS 
N/A
+155 HP
N/A
+154 FT-LBS

Acceleration Testing

 

STAGE0-60
MPH
0-62
MPH
0-100
KPH
0-100
MPH
60-120
MPH
62-124
MPH
100-200
KPH
60-130
KPH
30-130
KPH
Stock 6.140 6.471 6.492 15.335 18.816 21.816 21.618 29.273 33.921
Stage 1 93 AKI 5.474 5.737 5.901 12.872 13.533 14.946 15.115 18.293 22.472
Stage 2 E85 4.396 4.646 4.663 10.950 12.570 14.045 14.104 17.482 20.854

APR EMCS Program Switching

Program switching allows you to access additional program modes and features from your cruise control stalk or your smart device with APR Mobile. Depending on the ECU, available memory, and selected options, up to four program modes and all features, can be installed.

  • Stock Mode - Go back to the stock power levels.
  • Performance Modes - Switch between octanes and program modes.
  • Valet Mode - Neuters the vehicle, giving the driver minimal output.
  • Security Lockout - Password protects program switching.
  • Anti-Theft - Password protects driving the vehicle.
  • Fault Code Erase - Resets ECU fault codes and adaptation.

APR Mobile

APR Mobile installs on smartphones, tables and other devices, and connects wirelessly to your ECU. The app can then be used to access features such as program switching, fault code reading and resetting, and high speed data logging.

Who we are - We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!

What we do - We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.

How we differ - With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!

 

Videos Hide Videos Show Videos