APR ECU Upgrade** - 4.0T EA824 V8 for 2014-2018 C7 RS6/RS7

APR

$1,079.93
(No reviews yet) Write a Review
SKU:
ECU-40T-EA824-RS
Availability:
Please call or email us for an appointment
Adding to cart… The item has been added

Overview

APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port, resulting in a clean and headache-free install. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!
 

Fits 2014-2018 Audi RS7

Features:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Warranty - APR Plus is available, providing a factory term limit matching limited powertrain warranty
  • Program Switching - Change programs and access features with your cruise control stalk
  • Stages - Multiple performance levels depending on installed hardware
  • APR Mobile - Change programs and access features with your smart device
  • Valet Mode – Neuters the vehicle, giving the driver minimal output
  • Anti-Theft – Password protects driving the vehicle
  • Security Lockout – Password protects program switching
  • Fault Code Erase – Resets ECU fault codes and adaption on the fly
  • COD Delete – Optionally disable Cylinder On Demand to keep the engine running smoothly in full cylinder mode all the time
  • Fuel Grades - Multiple octanes from which to choose
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Brake Boosting - Left foot braking or brake boosting added
  • Speed Limiter - Go as fast as you want with the speed limiter out of the way
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Motorsport Limiter - With the soft limiter removed, you’ll get full power right up to the hard, “bap bap bap” redline fuel cut
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
  • Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
  • Free Updates - Get free updates for life
Important fuel quality information
Important fuel quality information
 
Find your boxcode and revision
Find your boxcode and revision
 
Program switching guide
Program switching guide
 
APR Plus Warranty Booklet
APR Plus Warranty Booklet
 
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
 

APR ECU Upgrade Stages

Our ECU Upgrades are available in multiple configurations. Installation of additional performance hardware, such as an intercooler or intake systems, may provide further performance improvements.

APR Stage 1

The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to 645-722 HP and 656-849 FT-LBS of torque.

Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 AKI, and 108 AKI in the Rest of the World.

APR Stage 2

The APR Stage 2 ECU Upgrade is the next step towards tuning your engine. It produces up to 679-759 HP and 703-889 FT-LBS of torque.

APR Stage 2 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 AKI, and 108 AKI in the Rest of the World.

APR Calibration Report 

STAGE (C7 / C7.5)HPTQMAX GAINMAX GAIN
Stock As Reported by VAG  560-605 PS  516 FT-LBS    
Stock As Measured by APR 582 HP
558 HP 
563 FT-LBS
559 FT-LBS
   
APR PLUS    
91 AKI 645 HP
665 HP  
656 FT-LBS
726 FT-LBS
+90 HP
+119 HP
+134 FT-LBS
+183 FT-LBS
STAGE 1    
91 AKI / 95 RON 645 HP
665 HP
656 FT-LBS
726 FT-LBS
+90 HP
+119 HP
+134 FT-LBS
+183 FT-LBS
93 AKI / 95 RON 674 HP
667 HP  
700 FT-LBS
746 FT-LBS  
+123 HP
+135 HP
+179 FT-LBS
+202 FT-LBS
100 AKI / 104 RON 728 HP
697 HP  
744 FT-LBS
765 FT-LBS 
+162 HP
+157 HP
+223 FT-LBS
+221 FT-LBS
104 AKI / 108 RON N/A
722 HP 
N/A
849 FT-LBS
N/A
+212 HP
N/A
+304 FT-LBS
STAGE 2    
91 AKI / 95 RON 679 HP
687 HP  
703 FT-LBS
777 FT-LBS  
+122 HP
+151 HP
+181 FT-LBS
+234 FT-LBS
93 AKI / 95 RON 712 HP
709 HP  
751 FT-LBS
797 FT-LBS  
+160 HP
+168 HP
+231 FT-LBS
+254 FT-LBS
100 AKI / 104 RON 761 HP
730 HP  
793 FT-LBS
811 FT-LBS  
+203 HP
+201 HP
+273 FT-LBS
+268 FT-LBS
100 AKI / 104 RON N/A
759 HP
N/A
889 FT-LBS
N/A
+250 HP
N/A
+345 FT-LBS

Acceleration Testing

 

STAGE0-60
MPH
0-62
MPH
0-100
KPH
0-100
MPH
60-120
MPH
62-124
MPH
100-200
KPH
60-130
MPH
30-130
MPH
Stock 3.535 3.720 3.734 7.936 7.771 8.314 8.345 9.656 11.603
APR STG 1 93 AKI 3.176 3.306 3.315 6.776 6.373 6.899 6.949 8.022 9.654

APR EMCS Program Switching

Program switching allows you to access additional program modes and features from your cruise control stalk or your smart device with APR Mobile. Depending on the ECU, available memory, and selected options, up to four program modes and all features, can be installed

  • Stock Mode - Go back to the stock power levels.
  • Performance Modes - Switch between octanes and program modes.
  • Valet Mode - Neuters the vehicle, giving the driver minimal output.
  • Security Lockout - Password protects program switching.
  • Anti-Theft - Password protects driving the vehicle.
  • Fault Code Erase - Resets ECU fault codes and adaptation.

APR Mobile

APR Mobile installs on smartphones, tables and other devices, and connects wirelessly to your ECU. The app can then be used to access features such as program switching, fault code reading and resetting, and high speed data logging.

The APR Difference 

Who we are - We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!

What we do - We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.

How we differ - With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!

 

 

 

 

 

 

Videos Hide Videos Show Videos