B2BFAB Camber Correcting Lift Kit - VW MK7 Golf/Sportwagen

B2BFAB

$567.00
(No reviews yet) Write a Review
SKU:
B2BFABGSCCLK
Availability:
Usually ship within 1 - 2 weeks
Adding to cart… The item has been added

Product Details

The B2BFAB Camber Correcting Lift Kit is the only kit on the market for your Golf / Sportwagen with TDI or gas engine and FWD or 4 motion that provides the 1.5" lift you want without sacrificing handling or proper alignment specifications!

The Overview: The owners of B2BFAB developed the first lift kit in 2016 for the MQB platform (MQB = shared chassis for Atlas, Tiguan, Alltrack, Taos, Golf, Jetta, Audi A3, Q3, and more). The initial kit was a simple bolt through front spacer design and resulted in less than ideal alignment specs, which made for less than ideal handling and tire wear. Both were issues that needed to be addressed. Over the next five years, we tested numerous prototypes and worked to perfect a design that checked all of the boxes. We are proud to introduce the B2BFAB Mk7 Golf / Sportwagen Camber Correcting Lift Kit!

The Problem: For all Mk7 models and the majority of road-going vehicles, a small amount of negative camber is dialed into the front and rear suspension to offer proper  handling. When an Mk7 is lifted with a bolt through spacer lift kit or spring lift the negative camber of the front wheels is reduced or removed. With no camber adjustment present on the front suspension components, zero camber or even positive camber is unavoidable with bolt through lift spacers or spring lifts.

"Why do I care?" The proper amount of negative camber ensures optimal contact between the tire and the road through all handling maneuvers. When front camber is outside of the manufacturer's specified range in the positive direction, the handling is floaty, twitchy, and generally unstable at highway speeds. Unfortunately the Mk7 does not have a way to adjust front camber.

The Solution: By offsetting the upper mounting point of the front struts, our lift kit removes the excessive positive camber allowing proper suspension geometry and specifications.

B2BFAB STRONGLY RECOMMENDS replacing ALL one time use hardware during the install to ensure proper torque specs and avoid hardware failure. 

Vehicle Fitment

Volkswagen Mk7 (2015-2017) Golf TDi
Volkswagen Mk7 (2015-2017) Golf 1.8T
Volkswagen Mk7 (2015-2017) Sportwagen TDi
Volkswagen Mk7 (2015-2017) Sportwagen 1.8T
Volkswagen Mk7.5 (2018-2021) Golf 1.8T
Volkswagen Mk7.5 (2018-2021) Golf 1.4T
Volkswagen Mk7.5 (2018-2021) Sportwagen 1.4T FWD
Volkswagen Mk7.5 (2018-2021) Sportwagen 1.4T 4Motion
Volkswagen Mk7.5 (2018-2021) Sportwagen 1.8T FWD
Volkswagen Mk7.5 (2018-2021) Sportwagen 1.8T 4Motion