- 63% More Volume -Extreme cooling for peak performance
- 31.87% Lower IATs -Maintain maximum power output safely
- 12.66% Better Flow -Optimized airflow for any build
- FDS Technology -Even air distribution across the core
- Carbon Fiber Air Guides -Forced supply of the coolest air
- Built To Perform -TIG-welded, rigorously tested, premium quality
Our twin iE FDS Intercoolers for the Audi RS6 and RS7 4.0T are built with a relentless focus on performance, utilizing every inch of available space to deliver a 63% increase in volume. With carbon fiber air guides feeding fresh air, and our proprietary Flow Distribution System (FDS) ensuring efficient airflow, heat soak becomes a thing of the past. Whether you're running a Stage 1 tune or hybrid turbos, these intercoolers keep IATs (intake air temperatures) low. Keep your flagship V8 at full potential, no matter how hard you push it.
DESIGN DETAILS
HIGH-VOLUME / HIGH-FLOW / LOW-TEMP
BIGGER IS BETTER
Factory intercoolers struggle to manage heat, even on stock RS6/RS7 setups, let alone with upgrades. The small stock 401.6in³ / 6,581cc intercoolers quickly hit their limit, forcing the engine to pull power.
iE intercoolers deliver a massive 657.4in³ / 10,773 cc of core volume, offering superior heat dissipation for reliable performance across all builds from entry-level tunes to hybrid turbo monsters. No more power loss from heat soak -just consistent, exhilarating power.
FDS ADVANTAGE
Size means nothing without efficiency. iE’s exclusive FDS technology channels air evenly across the core using strategically designed fins inside the end tanks. This ensures optimal cooling, reduces pressure drop, and minimizes heat build-up. The result? Consistently lower IATs and faster recovery, giving you reliable performance with every pull.
BREATH OF FRESH AIR
Our twin carbon fiber air guides force the coldest outside air from outside the bumper straight into the intercoolers. This isolates the intake charge air from the hot engine bay, keeping airflow cool and steady. With optimal airflow management, you'll unlock more power for every mile.
ENGINEERED TO PERFORM
Each iE intercooler is hand-welded by specialists, ensuring top-tier craftsmanship. After TIG welding, every unit undergoes strict testing and multi-point inspections to ensure zero leaks and flawless functionality. Expect nothing less than perfection right out of the box.
PERFORMANCE DATA
POWER IS IN THE TESTING
DOMINATE HEAT SOAK
When turbos push the limits, factory intercoolers allow intake temperatures to rise, forcing the ECU to pull timing and boost, leading to power loss. iE’s oversized intercoolers and FDS tech keep IATs consistently lower than stock, maintaining peak output for your RS6 or RS7. With our intercoolers, you stay in the fast lane.
IMPROVED FLOW
Flow testing confirms up to a 12.66% increase in airflow over the stock setup, allowing your engine to breathe freely at any power level. By increasing airflow and reducing pressure drop, our intercoolers ensure smooth, unrestricted power delivery across the entire RPM range.
In. H2O STOCK CFM iE CFM Increase % 5
118.5
133.5
12.66%
10
170.5
192
12.61%
15
210
235.5
12.14%
20
243
272
11.93%
25
271.5
304
11.74%
30
298
333
11.74%
TEMPERATURE TESTING
The graph showcases five individual back-to-back single-gear pulls, comparing the intake air temperatures (IATs) between stock intercoolers and iE’s FDS-equipped intercoolers. Each pull with iE intercoolers shows significantly lower IATs, preventing heat build-up and power loss.
PULL STOCK IAT iE IAT Decrease % 1
72.46 °C
49.36 °C
31.87%
2
69.56 °C
60.96 °C
12.36%
3
77.46 °C
56.86 °C
21.81%
4
73.76 °C
56.86 °C
22.49%
5
73.36 °C
57.96 °C
20.99%
AVERAGE IAT RESULTS
This graph details the average comparison of IATs after consecutive back-to-back pulls. With stock intercoolers, temperatures rise sharply and stay there, leading to noticeable power reduction. In contrast, iE intercoolers maintain an average of 21.9% lower and far more stable IATs, showing minimal heat soak even under intense conditions.
The denser and cooler charge air, lower IATs, and increased flow work together to retain more power throughout each pull, delivering faster acceleration and sustained performance.
INSTALLATION
Despite their impressive size, these intercoolers are designed for a bolt-on job. Installation is straightforward with basic tools and only requires minor trimming of the wheel liners.
Average install time around 2-4 hours
FOR THE PERFECTIONIST
Our engineers leveraged advanced 3D scanning and rapid prototyping to guarantee a flawless fit. The result is an intercooler system that integrates seamlessly with your Audi, preserving the clean aesthetics of your premium RS6 or RS7.
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE AUDI
RS6
2021-2024 (C8)
4.0TT
AUDI
RS7
2021-2024 (C8)
4.0TT