Suitable for the use with most 4-stroke gasoline and diesel engines. Tested safe for the use with catalytics and turbochargers. Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum product performance.
Engine Flush quickly remove deposits from oil passages, timing chains and piston ring area to restore compression and optimize oil consumption. Hydraulic operation and oil flow is restored in all systems. Safe for use with turbochargers and Belt-In-Oil systems. Engine Flush allows the fresh oil to immediately develop its full performance while also restoring engine efficiency and reducing exhaust emissions.
One 500 ml can is sufficient for up to 5 liters (1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with most commercially available engine oils, and in oil running belt. Minimum oil filling of 3 liters (0.8 gal.) is requested for optimum product performance. Observe: Not suitable for use on motorbikes with wet clutches.
