Ringer Racing Billet Series Clutch Kit - B8/8.5 3.0T and 4.2L

Ringer Racing

$1,825.74
(No reviews yet) Write a Review
SKU:
RR060-BCS
Availability:
Usually ship within 1 - 2 Weeks
Adding to cart… The item has been added

This is a Private Label kit built by Clutch Masters exclusively for Ringer Racing

 

Ringer Racing break-in procedure for OZ and ZZ clutch kits (Stage 3 thru Stage 5+)
Plenty of city driving using the clutch, so shifting thru the gears.
Part throttle 1 st gear, once in 2 nd gear or in 3 rd gear above 3k rpm you can go WOT running out the gears to redline.
Doing hard pulls will help burn off the protective clear coating that is on the Cerametalic material on the disk.
Once the clear coating wears off the material and then the disk material will get bedded in.
No hard pulls starting in 4th gear or higher and no launching the car for the first 600-1000 miles.
There will be some clutch chatter while slipping the clutch in 1 st gear or reverse, this is caused by the clear coating.
As the clear coating wears the chatter will start to fade to the point that there shouldn’t be any or much chatter at all.

 

Kit includes:

  • Ringer Racing 240mm Billet Series Clutch Kit
  • Throw-out Bearing
  • Alignment tool

 

Stage 3

  • Street Clutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Ductile Iron Casting
  • Sprung hub/cushioned Steel backed disc
  • Steel backed Organic/Cerametalic Material
  • Blue Diaphragm

 
Stage 3+

  • Street Cutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Sprung hub/cushioned Steel backed disc
  • Steel backed Organic/Cerametalic Material
  • White Diaphragm - Increased clamp load and pedal resistance


Stage 4

  • Street/Race Clutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Sprung hub/cushioned Steel backed disc
  • Full Face Cerametalic Material on both sides
  • Blue Diaphragm

 
Stage 4+

  • Street/Race Clutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Sprung hub/cushioned Steel backed disc
  • Full Face Cerametalic Material on both sides
  • White Diaphragm - Increased clamp load and pedal resistance

 

Stage 5

  • Street/Race/Drag Clutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Sprung hub 6-button iron disk
  • Blue Diaphragm


Stage 5+

  • Street/Race/Drag Clutch
  • Heavy-Duty Billet Aluminum pressure plate cover
  • Hi-Leverage pressure ring design
  • Sprung hub 6-button iron disk
  • White Diaphragm - Increased clamp load and pedal resistance

 

Option

  • Stainless Clutch Line for stock slave cylinder