Product Details
The subframe knock issue is common amongst the Golf and Jetta MKV and the Passat B6. If you have taken your vehicle to the dealership but they have not been able to solve the problem, here is your solution.
These bolts and spacers replace the stock bolts that connect your subframe. Over time, the stock bolts stretch and allow slop in the front subframe. Replacing your stock units with identical replacements will only delay the issue and it will reappear after the replacements stretch. Use these replacement bolts to tighten everything in the front end back up.
Some individuals think that because the stock bolts are designed to break in a front end collision, they should not be replaced. However, Volkswagen of America has since put out a technical service bulletin to dispel these rumors and replace stock bolts with these units.
Kit Contents:
OEM VW/Audi Hex Bolt M12x1.5x110 (N90823501) x 2
OEM VW/Audi Subframe Spacer Plate (7M3499349A) x 2
This Part Fits the Following:
| Make | Model | Submodel | Engine |
|---|---|---|---|
| Volkswagen | CC | 4Motion | VR6 |
| Volkswagen | CC | FWD | 2.0T |
| Volkswagen | CC | FWD | VR6 |
| Volkswagen | EOS | All | 2.0T |
| Volkswagen | EOS | All | 3.2L |
| Volkswagen | Golf R | All | 2.0T |
| Volkswagen | Golf V | All | 2.0T |
| Volkswagen | Golf V | All | 2.5 |
| Volkswagen | Golf V | All | TDI |
| Volkswagen | Golf VI | All | 2.0T |
| Volkswagen | Golf VI | All | 2.5 |
| Volkswagen | Golf VI | All | TDI |
| Volkswagen | Jetta V | All | 2.0T |
| Volkswagen | Jetta V | All | 2.5 |
| Volkswagen | Jetta V | All | TDI |
| Volkswagen | Passat B6 | 4 Motion | 3.6L |
| Volkswagen | Passat B6 | FWD | 2.0T |
| Volkswagen | Passat B6 | FWD | 3.6L |
| Volkswagen | R32 MKV | All | 3.2 |
| Volkswagen | Tiguan 1 | 4 Motion | 2.0T |
| Volkswagen | Tiguan 1 | FWD | 2.0T |
| Volkswagen | Tiguan 2 | 4 Motion | 2.0T |
| Volkswagen | Tiguan 2 | FWD | 2.0T |
