Product Details
The factory plastic charge pipes and flanges were never designed to handle the stress and abuse of higher boost levels much beyond stock. When combined with power-robbing abrupt and sharp bends, kinks, inferior plastic materials, and small diameter tubing, it's easy to see why your charge pipes and should be replaced, even on stock vehicles.
At ECS Tuning, we're proud to release our in house engineered High Flow Post Throttle Valve Charge Pipe Kit! Each kit comes standard with 57mm enlarged powdercoated 6063 aluminum charge pipes, 5 ply silicone turbo outlet hose, billet turbo outlet flange, 63.5mm enlarged port matched throttle body outlet, smooth flowing silicone couplers, and stainless steel T-Bolt clamps for an easy, direct bolt on upgrade.
Capable of withstanding greater heat and higher boost pressure than stock, you can expect to achieve greater reliability, less turbulence and less restriction thanks to the larger diameter tubing. Never worry about blowing couplers off of our tubes, as each tube is bead rolled and secured with stainless T-bolt clamps over our 4-ply reinforced silicone couplers.
Key Features:
- Reduced air turbulence
- Increased air flow capacity
- Removes factory "noise chamber" in the turbo outlet pipe for more turbo sound
- 57mm diameter enlarged piping
- TIG welded with billet flanges
- 4-ply silicone couplers
- Aluminum tubing powder coated in a tough wrinkle black or red finish
- 5-ply silicone turbo outlet hose
- 63.5mm port matched throttle body outlet
- Silicone turbo outlet with optimized flow geometry
- Includes all stainless steel T-bolt clamps
- Easy and direct replacement upgraded kit
The ECS Tuning High Flow Aluminum Post Throttle Valve Charge Pipe Kit was designed with a focus on improving performance while maintaining OEM fitment through the use of quality parts. Attention to detail is never missed here at ECS Tuning, and this kit is no exception.
For help with installation we have provided you with a PDF, available under the Installation category on the product page, to guide you through fitting on your new charge pipe system.
*May come with Phillips head screws instead of hex head screws due to supply chain difficulties.
**Does not include intercooler/pre-throttle body charge pipes, see ES#3638868 or ES#3639384 to make your kit complete!
****Designed for US spec vehicles with OEM part number 06M145674DA hard pipe.
