Motorsport Hardware Conical seat to Ball seat Adapter

Each kit consists comes with 16 or 20pcs depending on the option selected.

• Converts 60 degree conical seat nuts to ball seat
• Can be used with all Motorsport Hardware standard conical and extended race nuts
• Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25
• Inserts between wheel and conical nut
• Manufactuered from hardended steel
• Zinc plated
• Outer diameter: 22.8mm, Inner diameter: 15.2mm, Height: 6.3mm

Tips for use:

• To ensure safe use, when installing, make sure that you get at least 6.5turns when tightening nut
• Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs