Free In-Store Flashing and Consultation!
There is no extra charge for flashing at our shop if you do not wish to purchase the flashing cable. Updates and/or re-flash are also complimentary as long as the tune was purchased from us and applicable to the original purchaser.
Stage 1 ECU
Description
Performance Software Precisely Engineered for a completely stock car.
Subject to ECU box code availability.
Subject to ECU box code availability.
Features
- Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components. - Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit)
Recommended Hardware
Oil and Additives Recommendation
Unitronic uses and recommends Liqui Moly Oil & Additives exclusively for your vehicle, which meet Audi/VW approvals.
To ensure your vehicle is maintained with the #1 oil brand in Germany, see what is recommended for you with the
Liqui Moly Oil Guide.
Liqui Moly Oil Guide.
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 1+ ECU
Description
Performance Software Precisely Engineered for a completely stock car.
Subject to ECU box code availability.
Subject to ECU box code availability.
Features
- Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.
- Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit) - Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - Full Staged Software Suite
Includes all Stage 1+ tune variants and all lower software stages as well.
Recommended Hardware
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 2 ECU
Description
Performance Software Precisely Engineered for use with an upgraded exhaust system.
Subject to ECU box code availability.
Subject to ECU box code availability.
Features
- Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.
- Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.
- Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit) - Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - Stage 2 Optimized Low End Torque:
Unitronic’s Stage 2 Performance Software Calibration offers an improved low end torque curve over Stage 1+ due to back pressure relief from Unitronic’s Performance Downpipe. Power peak increase is minimal due to turbo maximum efficiency already reached with previous stages. - Full Staged Software Suite
Includes all Stage 2 tune variants and all lower software stages as well. *Does not include Unitronic Stage 2 IS20 software.
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 2 IS20 ECU
Description
Performance Software Precisely Engineered for use with IS20 (GTI/A3 2.0 TSI) Turbocharger Upgrade for the 1.8 TSI Gen3 MQB.
Subject to ECU Box code availability.
Subject to ECU Box code availability.
Features
- Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components. - Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit) - Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - OEM IS20 Turbo Upgrade Calibration:
With maximum turbocharger efficiency reached with Stage 1, Stage 1+ and Stage 2, Unitronic developed a unique solution to bridge the gap between Stage 2 and Stage 2+ (IS38) turbo upgrade. This results in the use of a factory IHI IS20 turbocharger, from a MK7 GTI, as a complete bolt-on solution producing a power increase of 44hp and 19lb-ft tq over the Stage 2 output, using the OEM turbocharger (IS12). - Full Staged Software Suite
Includes all Stage 2 tune variants and all lower software stages as well.
Required Hardware
- Carbon Fiber Intake For MK7 GTI | MK7 R | 8V A3 | 8V S3 | MK3 TT
- Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
- MQB Turbo Inlet Elbow
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD
- IS20 Turbo Upgrade (GTI/A3 2.0 TSI)
- *Unitronic cannot guarantee results for Clients using third-party hardware and results may vary as a result. Post-sale technical support can not be provided by Unitronic or its affiliates for Clients using third-party hardware.
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 2+ IS38 ECU
Description
Unitronic is proud to introduce its Stage 2+ IS38 ECU Performance Software for the 1.8TSI EA888 engines found in the MK7 Golf, Sportwagen, Alltrack and some 8V A3.
Massive gains of +182HP/+139LB-FT over VW’s advertised output can be obtained with a Genuine IS38 Turbocharger, Unitronic Downpipe, Turbo Inlet Elbow, Carbon Fiber Intake System with Air Duct, and Intercooler Upgrade for a total engine output of 352HP / 324 LB-FT TQ.
Not available for Automatic Transmission (09G/09S) equipped models. DSG equipped models require Unitronic Stage 2 DSG Performance Software.
Subject to ECU Box code availability.
Massive gains of +182HP/+139LB-FT over VW’s advertised output can be obtained with a Genuine IS38 Turbocharger, Unitronic Downpipe, Turbo Inlet Elbow, Carbon Fiber Intake System with Air Duct, and Intercooler Upgrade for a total engine output of 352HP / 324 LB-FT TQ.
Not available for Automatic Transmission (09G/09S) equipped models. DSG equipped models require Unitronic Stage 2 DSG Performance Software.
Subject to ECU Box code availability.
Features
- Engineered with Strict Industry Standards:
With over 10 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.
- Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit) - Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - Full Staged Software Suite
Includes all Stage 2+ tune variants and all lower software stages as well.
Required Hardware
- 1.8TSI GEN3 MQB IHI IS38 Turbo Upgrade (Golf R/S3) by Unitronic
- Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB
- Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
- MQB Turbo Inlet Elbow
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD
- IS38 Turbo Upgrade (Golf R/S3 2.0 TSI)
- *Unitronic cannot guarantee results for Clients using third-party hardware and results may vary as a result. Post-sale technical support can not be provided by Unitronic or its affiliates for Clients using third-party hardware.
Recommended Hardware
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 3 ECU
Description
Unitronic is proud to introduce its Stage 3 ECU Performance Software for the 1.8TSI GEN3 MQB engines found in the MK7 Golf, Sportwagen, Alltrack and some 8V A3.
Massive gains of +225HP/+167LB-FT over VW’s advertised output can be obtained with a Hitachi High Pressure Fuel Pump, Genuine IS38 Turbocharger, Unitronic Downpipe, Turbo Inlet Elbow, Carbon Fiber Intake System with Air Duct, and Intercooler Upgrade for a total engine output of 395HP / 352LB-FT.
Not available for Automatic Transmission (09G/09S) equipped models. DSG equipped models require Unitronic Stage 3 DSG Performance Software.
Subject to ECU Box code availability.
LEARN MORE ABOUT THIS UPGRADE AND ALL REQUIRED COMPONENTS HERE.
Massive gains of +225HP/+167LB-FT over VW’s advertised output can be obtained with a Hitachi High Pressure Fuel Pump, Genuine IS38 Turbocharger, Unitronic Downpipe, Turbo Inlet Elbow, Carbon Fiber Intake System with Air Duct, and Intercooler Upgrade for a total engine output of 395HP / 352LB-FT.
Not available for Automatic Transmission (09G/09S) equipped models. DSG equipped models require Unitronic Stage 3 DSG Performance Software.
Subject to ECU Box code availability.
LEARN MORE ABOUT THIS UPGRADE AND ALL REQUIRED COMPONENTS HERE.
Features
- Engineered with Strict Industry Standards:
With over 20 years of experience in Bosch and Siemens engine management calibration, Unitronic is able to utilized its industry leading tools and equipment to assure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions:
Development begins using its in-house engine dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Additional validation and results comparison are completed using its in-house Maha Chassis dyno as a second step of product development. Beta calibrations are then tested in race and street scenarios, using multiple cars throughout the world under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. - Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in an OEM-like drivability and reliability. - Engine Temperature Protection (Rev Limit based on Engine Coolant Temperature):
Engine speed limit protection active under warm-up to prevent potential damage when coolant temperature is not within operation range. - Optimized Responsiveness and Drivability:
Professionally calibrated to improve engine response and reduce drive-by-wire lag. Optimized torque curve for more low end torque and faster turbo spool. - Optimized Smoothness and Driving Comfort:
Due to the large flat torque curve, the calibration offers a smooth operation under normal and hard acceleration. This results in linear acceleration with constant torque without low end torque peak that will cause loss of traction and uncontrollable power surge, at the expense of high engine speed power. - Optimized Maximum Output:
Unitronic development team delivers the maximum power output while staying within the operational limits of the factory components used. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine components.
- Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Improved Fuel Efficiency:
Optimized timing and injection under cruising condition for an improved fuel efficiency. - Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (If automatic, subject to transmission rotational speed limit) - Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - Full Staged Software Suite
Includes all Stage 3 tune variants and all lower software stages as well.
Required Hardware
- 1.8TSI GEN3 MQB IHI IS38 Turbo Upgrade (Golf R/S3) by Unitronic
- Carbon Fiber Intake System With Air Duct For 1.8/2.0 TSI Gen3 MQB
- Intercooler Upgrade Kit for 1.8 and 2.0 TSI Gen3 MQB and 8Y S3 by Unitronic
- MQB Turbo Inlet Elbow
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 AWD
- Unitronic Performance Downpipe 1.8 TSI MQB EA888.3 FWD
- 06L 127 025 N Hitachi HPFP
- 06L 145 100 A Vacuum Pump
- 06K 109 311 Cam Follower
- 06K 103 121 Seal
- WHT 005 184 O-Ring
- N 911 287 01 Socket head bolt x2
- *If buying a brand new HPFP, part number 06C 127 535 will be required to plug the additional fuel port.
Recommended Hardware
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 1 TCU
Features
- Engineered with Strict Industry Standards
- Extensively Tested Under Various Driving Conditions
- Optimized Responsiveness and Drivability
- Optimized Smoothness and Driving Comfort
- Rpm Limiter Increased to 6800
- Optimized "D" and "Sport Mode
- Gear Display Enabled in D and S Mode
- Launch Control increased to 3600
- Optimized cruising upshift setpoint for maximum responsiveness
- Sport Mode Wide Open Thorttle Upshifts optimized for maximum acceleration
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 2 TCU
Features
- Engineered with Strict Industry Standards
- Extensively Tested Under Various Driving Conditions
- Optimized Responsiveness and Drivability
- Optimized Smoothness and Driving Comfort
- Rpm Limiter Increased to 6800
- Optimized "D" and "Sport Mode
- Kick Downs Removed in Manual Mode
- Gear Display Enabled in D and S Mode
- Launch Control increased to 4000
- Optimized cruising upshift setpoint for maximum responsiveness
- Sport Mode Wide Open Throttle Upshifts optimized for maximum acceleration
- Includes all Stage 2 TCU tune variants and all lower TCU software stages as well.
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Stage 3 TCU
Features
- Engineered with Strict Industry Standards
- Extensively Tested Under Various Driving Conditions
- Optimized Responsiveness and Drivability
- Optimized Smoothness and Driving Comfort
- Rpm Limiter Increased to 6800
- Optimized "D" and "Sport Mode
- Kick Downs Removed in Manual Mode
- Gear Display Enabled in D and S Mode
- Launch Control increased to 4000
- Optimized cruising upshift setpoint for maximum responsiveness
- Sport Mode Wide Open Throttle Upshifts optimized for maximum acceleration
- Includes all Stage 3 TCU tune variants and all lower TCU software stages as well.
Upgrade Pricing Chart for Audi A3 1.8 TSI EA888 Gen3 MQB Unitronic Software Guarantee for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Software Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Unitronic Hardware Warranty for Audi A3 1.8 TSI EA888 Gen3 MQB
Description
UniCONNECT+ is a Programming and Diagnostic Interface which gives users the freedom to reflash their Engine Control Unit (ECU) or Transmission Control Unit (TCU) from the comfort of their own garage. With the ability to upgrade the Unitronic Performance Software, flash back to stock, and also perform diagnostics, UniCONNECT+ is a complete end-user programming and diagnostic interface that provides control over your vehicle.
Availability
UniCONNECT+ is available for purchase through our Authorized Dealer Network and directly from Unitronic. UniCONNECT+ is compatible with most of 2006 and up vehicles.*
Simple Installation
UniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort of your own home or garage.*
Unitronic recommends the use of these battery chargers to ensure, uninterrupted, trouble-free, flashing at home!
OptiMate 7 SELECT
OptiMate 6 SELECT
Unitronic recommends the use of these battery chargers to ensure, uninterrupted, trouble-free, flashing at home!
OptiMate 7 SELECT
OptiMate 6 SELECT
Change Software Maps
Quickly and Easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suite the hardware and fuel modifications or fuel grade used.
Data Logging
Gathering high resolution data is made easy with Unitronic’s pre-configured channel loadouts for fast and effortless troubleshooting and data logging.**
Simple back to factory restoration
UniCONNECT+ makes it painless to revert your ECU back to it’s stock calibration within minutes.*
Advanced Settings
Enable optional advanced settings such as Launch Control or No Lift Shifting within minutes. Enable Gear display in MFG for DSG Software owners.*
Technical Specifications
Minimum System Requirements:
Operating System: Microsoft Windows 10 or 11
Internet Explorer 11
Screen Resolution: 1024x768
Processor: 1.5 GHz or higher
Memory (RAM): 4GB or more
For optimal application performance:
Operating System: Microsoft Windows 11
Internet Explorer 11 or newer
Screen Resolution: 1024x768
Processor: 2.0 GHz or higher
Memory (RAM): 8GB or more
Internet access is required.
Operating System: Microsoft Windows 10 or 11
Internet Explorer 11
Screen Resolution: 1024x768
Processor: 1.5 GHz or higher
Memory (RAM): 4GB or more
For optimal application performance:
Operating System: Microsoft Windows 11
Internet Explorer 11 or newer
Screen Resolution: 1024x768
Processor: 2.0 GHz or higher
Memory (RAM): 8GB or more
Internet access is required.
*Some exclusions apply. UniCONNECT+ cables are VIN-locked and can only be used on one vehicle. Only available for select engines. Contact US for more information.
**Feature in development.
