APR ECU Upgrade** - 3.0T EA837 V6 (Simos 8.4) for 2010-2012 Audi S4/S5

APR

$0.00 - $1,214.93
(No reviews yet) Write a Review
SKU:
ECU-30T-EA837-SIM8.4
Availability:
Please contact us for an appointment
Adding to cart… The item has been added

Overview

APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port, resulting in a clean and headache-free install.
 

Fits 2010-2012 Audi S4, S5

Features:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Program Switching - Change programs and access features with your cruise control stalk (Stage 1 Only)
  • APR Mobile - Change programs and access features with your smart device (Stage 1 Only)
  • Valet Mode – Neuters the vehicle, giving the driver minimal output
  • Anti-Theft – Password protects driving the vehicle
  • Security Lockout – Password protects program switching
  • Fault Code Erase – Resets ECU fault codes and adaption on the fly
  • Stages - Multiple performance levels depending on installed hardware
  • Fuel Grades - Multiple octanes from which to choose
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Brake Boosting - Left foot braking or brake boosting added
  • Speed Limiter - Go as fast as you want with the speed limiter out of the way
  • Rev Limiter - Increased redline for higher revving
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Motorsport Limiter - With the soft limiter removed, you’ll get full power right up to the hard, “bap bap bap” redline fuel cut
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
  • Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
  • Free Updates - Get free updates for life
 
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
 

APR ECU Upgrade Stages

APR’s ECU Upgrades are available in multiple octanes levels. Each stage is fully compatible with an upgraded intake, catback exhaust, or other minor bolt on modifications.

APR Stage 1

The APR Stage 1 ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications and produces 427-462 HP with 370-387 of torque. To get more power, the vehicle can be outfitted with an upgraded intake, cooler, catback exhaust, and various other bolt-on modifications all without requiring any new modifications to the ECU.

APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 RON, and 108 RON in the Rest of the World.

APR Stage 2

The APR Stage 2 ECU Upgrade is the next step towards making more power! This simple upgrade requires upgrading the supercharger pulley, crank pulley, or both pulleys and produces 437-527 HP with 386-469 FT-LBS of torque when upgrading a single pulley. A cooler is highly recommended, and required to meed advertised results with a dual pulley setup. Use NGK Iridium IX BKR9EIX spark plugs. To get more power, the vehicle can be outfitted with an upgraded intake, exhaust, and various other bolt-on modifications all without requiring any new modifications to the ECU.

APR Stage 2 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 RON, and 108 RON in the Rest of the World.

APR Stage 2 Plus Ultra 

The APR Stage 2+ Ultra ECU Upgrade is the next step towards making more power! This simple upgrade requires the APR Ultracharger Throttle Body Upgrade, both the supercharger and crank pulley, intake, cooler, and exhaust and produces 478-542 HP with 426-472 FT-LBS of torque. Use NGK Iridium IX BKR9EIX spark plugs. To get more power, the vehicle can be outfitted with various other bolt-on modifications all without requiring any new modifications to the ECU.

APR Stage 2+ Ultra is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America, and 95 RON, 98 RON, 104 RON, and 108 RON in the Rest of the World.

APR Calibration Report

StageHPTQMax GainMax Gain
Stock As Reported by VAG  333 PS  325 FT-LBS    
Stock As Measured by APR 359 HP 350 FT-LBS    
Stage 1    
91 AKI / 95 RON 427 HP 370 FT-LBS +84 HP +61 FT-LBS
93 AKI / 98 RON 441 HP 375 FT-LBS +98 HP +72 FT-LBS
100 AKI / 104 RON 458 HP 385 FT-LBS +115 HP +84 FT-LBS
104 AKI / 108 RON 462 HP 387 FT-LBS +119 HP +87 FT-LBS
Stage 2 Single Pulley    
91 AKI / 95 RON 437 HP 386 FT-LBS +94 HP +68 FT-LBS
93 AKI / 98 RON 455 HP 395 FT-LBS +112 HP +82 FT-LBS
100 AKI / 104 RON 473 HP 404 FT-LBS +130 HP +95 FT-LBS
104 AKI / 108 RON 480 HP 409 FT-LBS +138 HP +100 FT-LBS
Stage 2 Dual Pulley    
91 AKI / 95 RON 445 HP 412 FT-LBS +100 HP +80 FT-LBS
93 AKI / 98 RON 465 HP 428 FT-LBS +120 HP +97 FT-LBS
100 AKI / 104 RON 513 HP 459 FT-LBS +168 HP +126 FT-LBS
104 AKI / 108 RON 527 HP 469 FT-LBS +182 HP +136 FT-LBS
Stage 2+ Ultra    
91 AKI / 95 RON 478 HP 426 FT-LBS +133 HP +97 FT-LBS
93 AKI / 98 RON 498 HP 441 FT-LBS +154 HP +112 FT-LBS
100 AKI / 104 RON 530 HP 464 FT-LBS +185 HP +135 FT-LBS
104 AKI / 108 RON 542 HP 472 FT-LBS +196 HP +143 FT-LBS

 

APR EMCS Program Switching

Program switching allows you to access additional program modes and features from your cruise control stalk or your smart device with APR Mobile. Depending on the ECU, available memory, and selected options, up to four program modes and all features, can be installed.
  • Stock Mode - Go back to the stock power levels.
  • Performance Modes - Switch between octanes and program modes.
  • Valet Mode - Neuters the vehicle, giving the driver minimal output.
  • Security Lockout - Password protects program switching.
  • Anti-Theft - Password protects driving the vehicle.
  • Fault Code Erase - Resets ECU fault codes and adaptation.

APR Mobile

APR Mobile installs on smartphones, tables and other devices, and connects wirelessly to your ECU. The app can then be used to access features such as program switching, fault code reading and resetting, and high speed data logging 

Who we are - We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!

What we do - We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.

How we differ - With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!

 

 

 

 

 

Videos Hide Videos Show Videos